Kalbadevi, Mumbai, Maharashtra
GST No. 27AAAHN6108C1ZM
Call 08048605995 54% Response Rate
Brand | Dynapar |
Usage/Application | Industrial |
Size/Dimension | 36 mm |
Current Consumption | 30mA |
Frequence | 50 Hz |
Material | Stainless Steel |
Operating Temperature | 20 Degree C ~ +60 Degree C |
Hengstler presents the shortest hollowshaft encoder world wide: The AD35. It is available with a 8 mm hub shaft and and a resolution up to 22 Bit Singleturn. The mechanical design consists of two ball bearings and a flexible torque support. The AD35 complements the ACURO-DRIVE series and is appropriate for use within BLDC servo motors with small frame sizes. Further fields of Application:
The new and completely digital OptoAsic technology enables the transition to a truly digital drive system. The conventional absolute encoders still have analog sine wave signals for the feedback of speed and position data. The AD35, however, provides fully digital position data up to 22 Bit over the BiSS interface with a variable clock rate up to 10 MHz. BiSS is the only open high speed bidirectional sensor interface available on the market. Backward compatibility to most of the existing drives is realized through the variant with SSI interface together with 2048 sine −cosine periods per revolution.
Integrated diagnostic system
The AD35 has an integrated diagnostic system that controls and regulates the internal signals. Maximum motor uptime is achieved through the pre warning in case of any system error or aging effects well before they affect the function of the encoder. A code plausibility check guarantees that the output data represents always the true position. Also the operating temperature can be measured and read out with 8 Bit resolution. If programmable limits are exceeded or under run this is indicated over warn and alarm bits.
Additional Information:
View Complete details
Brand | Hengstler |
Usage/Application | Industrial |
Encoder Type | Single Turn and Incremental Conic Shaft Encoder |
Shaft Type | Conic |
Resolution | 17 Bit |
Shaft Diameter | 10 mm |
Model Name/Number | F-21 |
Packaging Type | Box |
Number of Pulses: 1024, 2048; optional 6, 8, 10, 12 or 16 pole commutation signals
General Information: The type F21 encoder provides high performance, cost effective feedback for stepper and servo motor applications. The F21 offers compact package dimensions and flying leads for a low-profile installation. A size 21 servo ring allows easy mounting and replacement of pancake resolvers with high tolerance to motor shaft movement and 360 degrees of adjustment to align the signal outputs to the shaft position.
Additional Information:
View Complete details
Brand | Hengstler |
Usage/Application | Industrial |
Material | Stainless Steel |
Shape | Round |
Voltage | 10~30 VDC |
Country of Origin | Made in India |
Number of Pulses:
1024 / 2048 / 2500 / 4096 / 5000 / 10000
Other number of pulses on request
The central element of the RI80-E is the latest Hengstler OptoAsic technology, which offers the following key benefits:
A robust and generously dimensioned mechanical design ensures long maintenance free
operation. The RI80-E is ideally suited for applications like:
Additional Information:
View Complete details
Brand | Hengstle |
Usage/Application | Industrial |
Diameter | 36 mm |
Maximum Output Current | 30mA |
Output Frequency | 50 Hz |
Country of Origin | Made in India |
View Complete details
Brand | Dynapar |
Usage/Application | Industrial |
Diameter | 36 mm |
Maximum Output Current | 30mA |
Output Frequency | 50 Hz |
Country of Origin | Made in India |
Additional Information:
View Complete details
Brand | Hengstler |
Usage/Application | Industrial |
Current Consumption | 25 Amp |
Material | SS |
Operating Temperature | 120 Degree C |
Packaging Type | Box |
View Complete details
Phase | Three Phase |
Motor Part Type | Cover or Frame |
Brand | Hengstler |
Power | 4 HP |
Type Of Motor | AC Motor |
Material Type | Stainless Steel |
Country of Origin | Made in India |
Additional Information:
View Complete details
Phase | Three Phase |
Motor Part Type | Cover or Frame |
Brand | Dynapar |
Power | 4 HP |
Type Of Motor | AC Motor |
Material Type | Copper |
Country of Origin | Made in India |
Number of Pulses:
500- 2500; optional 4, 6 or 8 pole commutation signals
General Information: The type HC20 encoder provides high performance, cost effective feedback for stepper and servo motor controls. A compliant tether allows easy mounting with high tolerance to motor shaft movement and 20 degrees of adjustment to align the signal outputs to the shaft position. A superior optical configuration allows for generous internal component celerance eliminating potential damage at high ambient operating temperatures. High temperature rated grease is standard for extended bearing life. No special tools are required for installation.
Additional Information:
View Complete details
Brand | Hengstler |
Usage/Application | Laboratory |
Voltage | 10~30 VDC |
Country of Origin | Made in India |
Current Consumption | 30mA |
Additional Information:
View Complete details
Country of Origin | Made in India |
Voltage | 10~30 VDC |
Temperature | 20 Degree C ~ +60 Degree C |
Brand | Hengstler |
Current Consumption | 30mA |
Frequency | 50 Hz |
Additional Information:
View Complete details
Usage/Application | Hydraulic Pipe |
Material | Carbon Steel |
Diameter | Round |
Size | 3 inch |
Brand | Hengstler |
Shape | Round |
Max. Speed | 12 000 min -1 | |
Torque max. | 80 Ncm | |
Moment of inertia | 19 gcm 2 | |
Torsional spring constant | 150 Nm/rad | |
Max. angular misalignment | ±3.0° | |
Max. shaft misalignment radial | ±0.4 mm | |
axial | ±0.4 mm | |
Max tightening torque of set screws | 80 Ncm | |
Hub diameter d and d1 | 6 mm H 8 | |
Material | coupling body, flange | AICuMgPb, anodized |
preloaded disc | stainless steel | |
Weight approx. | 14.5 g |
View Complete details